Enabling And Disabling The Front Panel Menu - Tektronix Phaser 360 User Manual

6
Using the Front Panel

Enabling and disabling the front panel menu

6-4 Phaser 360 Color Printer
The printer allows a system administrator to lock the front panel menu by
downloading a utility Þle. In this protected mode, you can only print the
pages in the Help Pages menu; you cannot modify any settings in the other
menus.
For more information on enabling and disabling the front panel menu, refer
to the printerÕs CD-ROM or the Tektronix web site.
When the front panel is enabled, all front panel menu selections
are available. When you press the Menu button, the front panel
displays the following message:
Help Pages
<---- ---->
When the front panel is disabled and you press the Menu button,
the display shows only the pages in the Help Pages menu
(without the heading):
Configuration Page
<---- ---->
To access the entire menu with the front panel disabled, you must
use a special key sequence each time you want to enter the menu:
Press and hold down the Menu button and press the Exit button.
The front panel displays the following message:
Help Pages
<----
The full set of menus is now available.
Menu
Print
----> Menu