Printing From A Macintosh; Using Macintosh Printer Drivers; Using The Printerõs Front Panel; Downloading Utility Files - Tektronix Phaser 360 User Manual

Printing from a Macintosh

Using Macintosh printer drivers

Using the printer's front panel
Downloading utility files
To print from a Macintosh, you need a printer driver. Installing one of the
provided (supported) drivers allows you to select printing features right
from your computer. Refer to page 4-36 for a reference table of printing
features.
To select printer-speciÞc features, print from one of the following provided
drivers. See page 4-36 for a reference table listing the printing features, and
how to Þnd them quickly, in each of these drivers.
Phaser 360 driver (based on LaserWriter 7.1.2)
Phaser 360 GX driver (for use with QuickDraw GX)
Apple LaserWriter 8 driver (for most applications)
Without a supported driver, you can make some printing selections from the
printerÕs front panel. Refer to page 4-3 for a list of front panel selections and
to page 6-1 for instructions on using the front panel.
For information on selecting print options with utility Þles, refer to the
on-line documents on the printerÕs CD-ROM or the Tektronix World Wide
Web site.
Printing Basics
see page 4-38
see page 4-40
see page 4-39
User Manual 4-35
4