Sharing The Printer On A Network; Prints Do Not Reflect Your Settings; If The Apple Printer Utility Does Not Work - Tektronix Phaser 360 User Manual

8
Troubleshooting

Sharing the printer on a network

Prints do not reflect your settings

If the Apple Printer Utility does not work

8-34
Phaser 360 Color Printer
If you share a Phaser 360 printer with other users on a network, the
following two conditions may affect your prints:
Another user has downloaded a color correction utility Þle.
Someone has made color correction settings at the printerÕs front
panel.
You can override those settings if you are printing from a supported driver
by making sure that your color correction mode is set to any of the selections
except Use Printer Setting. If you are printing from a nonsupported driver,
you will need to either send a color correction utility Þle to the printer or
change the printerÕs settings at the front panel.
If the colors on your prints are still not what you expected, and your system
administrator has disabled some of the printerÕs front panel menus, ask
what settings are in effect and whether a color correction utility Þle has been
downloaded to the printer. You can also print a ConÞguration Page to see
the current color correction selection; see ÒPrinting the Help PagesÓ on
page 6-7 for instructions.
The Apple Printer Utility cannot be used if the printer is connected to a print
server. See your system administrator to temporarily remove the printer
from the print server to download any of the PostScript utility Þles.