ADJ HYDRO BEAM X1 User Instructions page 32

Hydro Beam X1
INFORMATION - The submenus listed under INFORMATION are as follows: Fixture Life Time,
Total Lamp Time, Fixture Temps, Humidity, Fan Info. (RPM), DMX Values, Error Logs, and Software
Version.
- FIXTURE LIFE TIME
• Power On Time -The TOTAL power ON running time of the unit is displayed. This time CANNOT
be reset. Reminder: The displayed time represents the TOTAL POWER ON time.
• P-On Time-R - The CURRENT power ON running time of the unit is displayed. This running time
may not be the same as the total power ON running time displayed under "Power On Time". This
time CAN be reset. Reminder: The displayed time represents the CURRENT POWER ON TIME
since the last reset.
• P-On Time Reset - Reset the CURRENT power ON running time that is displayed under "P-On Time-R".
- TOTAL LAMP TIME
• Lamp On Time - The TOTAL Lamp ON time is displayed. This total lamp ON time CANNOT be
reset. Reminder: The displayed time represents the TOTAL LAMP ON time.
• Lamp On Time-R - The CURRENT LED ON running time is displayed. This running time may not
be the same as the total lamp ON time displayed under "Lamp On Time". This total lamp ON
time CAN be reset. Reminder: The displayed time represents the CURRENT LAMP ON time
since the last reset.
• Lamp On Time Reset - With this function you can reset the CURRENT lamp ON time that is displayed
under "Lamp On Time-R".
- FIXTURE TEMPS
• Head
Current - Current temperature of the moving head is displayed.
Max Resettable - Maximum moving head temperature that has been recorded, before reset
and after reset. (Resettable)
Max Not Resettable - Overall maximum moving head temperature that has been recorded.
(Not Resettable)
• Base
Current - Current temperature of the base is displayed.
Max Resettable - Maximum base temperature that has been recorded, before reset and after
reset. (Resettable)
Max Not Resettable - Overall maximum base temperature that has been recorded.
(Not Resettable)
• Reset Head Temp - Reset the "MAX RESETTABLE" moving head temperature. (Pass Code is "50")
• Reset Base Temp - Reset the "MAX RESETTABLE" base temperature. (Pass Code is "50")
- HUMIDITY
Head Humidity - The current humidity of the moving head is displayed.
ADJ Products, LLC - www.adj.com - Hydro Beam X1 User Manual Page 31
System Menu