ADJ HYDRO BEAM X1 User Instructions page 15

Hydro Beam X1 Lamp Installation
5. Using your fingers, gently pull back the 2 lamp holders, and carefully slide the lamp to the right and
out.
6. Slide the new lamp into its socket by pulling it leftwards against the 2 lamp holders. Use a flat head
screwdriver and turn the lamp centering screw counter-clockwise to its original position.
7. Reconnect the (2x) spade terminals to the lamp and replace the cover and tighted the (4x) allen head
screws.
ADJ Products, LLC - www.adj.com - Hydro Beam X1 User Manual Page 14