System Menu - ADJ HYDRO BEAM X1 User Instructions

Hydro Beam X1

System Menu

SYSTEM MENU
The fixture includes an easy to navigate system menu control panel display where all necessary
settings and adjustments are made. (See image below) During normal operation, pressing the MENU
button once will access the fixture's main menu. Once in the main menu, you can navigate through
the different functions and access the sub-menus with the UP and DOWN buttons. When you reach
a field that requires adjusting, press the ENTER button to access that field and use the UP and
DOWN buttons to adjust the field. Pressing the ENTER button once more will confirm your setting.
You may exit the main menu at any time without making any adjustments by pressing the MENU
button.
SYSTEM LOCK/UNLOCK: When the display lock function is activated, the display and system
menu will lock after 10 seconds of no activity. To UNLOCK the display, press and HOLD the MENU
button for 10+ seconds.
While pressing the MENU button, a timer will appear at the bottom of the display indicating the pass-
ing seconds from 0-9. Once the timer reaches 9 seconds, the display will unlock allowing access to
the system menu.
DO NOT RELEASE THE MENU BUTTON UNTIL THE DISPLAY IS UNLOCKED.
If the MENU button is released before the timer reaches 9 seconds and/or is unlocked, the display
will not unlock and the time will be reset.
NOTE: The timer will not appear in the display if the lock function is disabled.
ADJ Products, LLC - www.adj.com - Hydro Beam X1 User Manual Page 26