Operating Information
4.3.3 Viewing stored measurements
To return to the measurement mode, switch the instrument
without holding down any additional buttons.
4.4 Storing and accessing measurements from the PC
If you have made measurements and stored them in the instrument, you should be ready to
bring them into the WinLog97 program for viewing, copying, saving and printing. Refer to
Options Setup on page 33
4.4.1 Downloading stored values
To download the stored results from the instrument to the PC, choose the DownLoad data
command from the Logger menu.
The DownLoad window presents a display of the stored measurements from the instrument.
The window displays five columns of data:
•
Sample (sequence number of the sample)
•
Gas (concentration of the measured gas)
•
Date (date of the measurement)
•
Time (time of the measurement)
•
Sample Description
The descriptions can be modified for your applications using the procedures described below.
28
1. Switch the instrument
2. Hold down the
3. Scroll through the numbered sample
4. To view the actual gas concentration
5. Press
for additional information on the WinLog97 program.
OFF
the
POWER
key)
Up Arrow
switching the instrument back ON. The
LCD displays a sample location number.
locations of all the stored values using the
Up Arrow
and
Down Arrow
measurement value at a particular sample
number, press the
STO
now displays the stored value for that
sample number.
STO
a second time to return to the
next numbered location display, to
continue scrolling or view another stored
value.
OFF
and then back
(by pressing
button while
buttons.
button. The LCD
ON
again