Recalling Stored Measurements - Hach POCKET COLORIMETER II Instruction Manual

2. Press
READ/ENTER
3. Use the
ZERO/SCROLL
accept and advance to the next digit. The time is entered in 24-hour format.

Recalling Stored Measurements

1. Press the
MENU
shows RCL. The instrument automatically stores the last
10 measurements.
2. In RCL, press
with the most recent measurement taken. The meter stores the
measurement number as 01 (most recent) through 10 (oldest), the time the
measurement was taken, and the measurement value. The
key allows for selection of a specific measurement by number. The
READ/ENTER
. The digit to be edited will flash.
key to change the entry, then press
key, then press the
to recall the stored measurements, beginning
READ/ENTER
key scrolls through all stored data points.
Instrument Operation,
ZERO/SCROLL
2—5
continued
READ/ENTER
key until the display
ZERO/SCROLL
to