Table of Contents
Advertisement
Operating Information
To start the analyzer, press the keyboard
When you turn power on, the instrument displays its model number briefly, and then starts in
measurement mode.
You can access other instrument functions by pushing one of these keys while turning power on:
Once you have completed the installation and start-up procedures defined in
page
oxygen or hydrogen analyzer. You may store these measurement values for later analysis via
the WinLog97 program (on your personal computer) or the memory view mode (on the
instrument). The WinLog97 program operation is described in detail throughout the manual,
where relevant.
24
Sensor calibration. Refer to
Start automatic data acquisition. Refer to
Start memory storage view. Refer to
Display program identification information
17, the instrument can be operated independently, making measurements as a portable
POWER
switch (located bottom left of the keyboard).
Sensor calibration on page 40
Automatic data acquisition on page 26
Viewing stored measurements on page 28
Installation on
Advertisement
Table of Contents
