Using Instructions - Heinner XMG-2000 User Manual

www.heinner.com
na
V. BEFORE FIRST USING
• Check that the voltage indicated on the energy label corresponds to the mains voltage
from the outlet.
• Before connecting the device to the mains, make sure the switch is in "OFF" position.
• Wash all components of the machine (except the body) in warm water with dishwashing
detergent.
VI. USING INSTRUCTIONS
ASSEMBLY
• Keep mixing tube and insert it into the
machine, mount the lock button and turn it
counterclockwise direction for fixing the
mixing tube. (Fig. 2)
• Place the chopping auger mixing in the tube
and turn slowly until the screw reaches the
motor housing. (Figure 3)
• Put the knife shaft cylinder blade to the
front as in Fig. April. If the knife is not
positioned correctly, will be minced meat.
• Then put the sieve near the desired desired
cutting knife, fixing protrusions in holes.
(Fig.5)
• Support or press the center of the cutting
board with a finger, then screw the locking
ring tight with the other hand (Fig. 6). Do not
tighten excessively loud.
• Place the tray on the mixing tube and fix it.
• Place the appliance on a stable surface.
• channel air beneath the appliance and the
side of the motor housing must not be
blocked.
2000W, 50/60Hz, 220-240V
14