Related Manuals for Heinner Juissiart JT-2250R
Summary of Contents for Heinner Juissiart JT-2250R
- Page 1 Meat Grinder Model No: JT-2250R INSTRUCTION MANUAL Please read carefully and keep the instruction well...
- Page 2 TABLE OF CONTENTS PARTS AND FEATURES..........3 INTRODUCTION ............4 IMPORTANT SAFEGUARDS ........5-7 INSTRUCTION FOR USE...........8-11 Assembling..............8 Mincer................9 Making kebbe...............10 Making sausages............11 Making noodle..............12 SHREDDER..............12 ASSEMBLING..............12 HOW TO CLEAN YOUR APPLIANCES.....13...
- Page 3 DESCRIPTION 1. Hopper plate 10. Cutting plate (fine) 2. Body 11. Cutting plate(medium) 3. Power 12. Cutting plate (coarse) 4. Reverse 13. Food pusher 5. Fasten button 14. Sausage 6. Head Tube 15. Kebbe 7. Snake 16. Blade cleaner 8. Cutting blade 17-21.
- Page 4 INTRODUCTION This appliance is equipped with a thermostat system. This system will automatically cut off the power supply to the appliance in case of overheating. If you appliance suddenly stops running: 1. Pull the mains plug out of the socket. 2.
- Page 5 IMPORTANT SAFEGUARDS 1.Read these instructions for use carefully and look at the illustrations before using the appliance. 2.Before use, tight the fixing ring by spanner, make sure the ring can not be detach by 4 Nm. 3.Keep these instructions for future reference. 4.Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
- Page 6 IMPORTANT SAFEGUARDS 15.Never immerse the motor unit in the water or any other liquid, nor rinse it under the tap. Use only a moist cloth to clean the motor unit 16.Do not attempt to grind bones, nuts or other hard items. 17.Never reach into the cutter housing.
- Page 7 IMPORTANT SAFEGUARDS 26.Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country.
- Page 8 INSTRUCTION FOR USE Assembling 1.Press the fasten button, hold the head and insert it into the inlet when inserting please pay attention the head must be slanted as per arrow indicated on the top, see (fig.1), then move the head anticlockwise so that the head being fastened tightly.
- Page 9 INSTRUCTION FOR USE 6.Place the hopper plate on the head and fix it into position. 7.Locate the unit on a firm place. 8.The air passage at the bottom and the side of the motor housing should be kept free and not blocked. Mincer 1.Insert the worm shaft into the cutter housing, the plastic end first.
- Page 10 INSTRUCTION FOR USE Making kebbe 1.Insert the worm shaft into the cutter housing, the plastic end first. (fig.8) Place the cone in the cutter housing. Place the former on the cutter housing and screw the ring on the cutter housing. (fig.9) 2.Attach the cutter housing to the motor unit.
- Page 11 INSTRUCTION FOR USE Making sausages 1.Mince the meat Insert the worm shaft into the cutter housing, the plastic end first. (fig.11) Place the separator in the cutter housing. Place the sausage horn on the cutter housing and screw the ring on the cutter housing. (Make sure the notches of the separator fit onto the projections of the mincer head.) 2.Attach the cutter housing to the motor unit.
- Page 12 SHREDDER Making noodle 1.Operation time shall NOT exceed 3 minutes. 2.use cutting plate 10 or 11 or 12. 3.fill the tray with flour continuely. ASSEMBLING 1.Press the fasten button, hold the plastic cutter housing and insert it into the tube inlet (when inserting please pay attention the plastic cutter housing must be slanted as per arrow indicated), then move the plastic cutter housing anticlockwise until it is fastened tightly, and release the...
- Page 13 HOW TO CLEAN YOUR APPLIANCES Meat left behind in the cutter housing may be removed from the inside of the appliance by passing a slice of bread through the cutter housing. 1.Before you clean the appliance, switch the appliance off and remove he plug from the socket.
- Page 14 Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country.
Need help?
Do you have a question about the Juissiart JT-2250R and is the answer not in the manual?
Questions and answers