Installing The Stator - HBM T40B Mounting Instructions

18
Measuring range
NVm
3k
5k
10k
Table 4.1: Fastening bolts
1)
DIN EN ISO 4762; black/oiled/m

4.6 Installing the stator

On delivery, the stator has already been installed and is ready for operation.
The upper antenna segment can be separated from the stator, for example,
for maintenance or to facilitate stator mounting.
If your application does not require the stator to be dismantled, proceed as
described in points 2, 5, and 6.
Antenna segment bolts
with washers (M5)
Fig 4.2: Bolted connection of the antenna segments on the stator
HBM
Fastening screws
1)
Z Property class
M12
M14
M16
= 0.125
tot
Fan‐type
lock washers
Prescribed tightening
12.9
Hole for fixing the
antenna segment,
diameter 4.2 or
5.2 mm, depending
on maximum
capacity
upper
Antenna segments
bottom
Stator housing
T40B
moment
NVm
135
220
340
A3452-4.0 en/de