1.
Turn the computer upside down with the front toward you.
2.
Remove the rubber foot (1).
The rubber foot is included in the Rubber Foot Kits using the following spare part numbers:
L71974-001 – In natural silver finish
●
L71975-001 – In nightfall black finish
●
L71973-001 – In Poseidon blue finish
●
3.
Remove the four Phillips M2.5×6.1 screws (2) that secure the bottom cover to the computer.
4.
Remove the two Torx5 M2.0×3.8 screws (3) that secure the bottom cover to the computer.
5.
Insert a case utility tool (1) or similar thin plastic tool into the display hinge areas of the bottom cover.
6.
Separate the rear edge (2) of the bottom cover from the top cover.
Component replacement procedures
35