Introduction; Geometry - Whyte E-150 Operating Instructions And Owner's Manual

9.0 Fitting Internal Cables & Hoses.
10.0 Removal of Battery
11.0 Torque Settings.
12.0 Owner's Notes

1.0: INTRODUCTION

Thanks for choosing to purchase this Whyte product. We hope you will enjoy all
the benefits its advanced design and engineering will bring to your riding experi-
ence.
This manual will guide you through the set-up, safety and maintenance proce-
dures that are specific to your Whyte bike. For other more general information,
we strongly advise that you also read thoroughly the General Instruction Manual
that is also supplied with your new bike.
Also, please note that the specification of all the components that are fitted to
your bike as standard may be obtained from the Whyte Bikes Brochure or alter-
natively from the Whyte Bikes website www.whyte.bike
Please remember, if you are in any doubt about your ability to safely service or
repair your Whyte bike, do not ride it and instead arrange for a professional bicy-
cle mechanic at your local Whyte dealer to do the job correctly.
Bundled with this manual, are the respective manufacturers instructions and
manuals for the branded parts and systems that are fitted to your Whyte bike.
Please take time to study all the relevant instruction manuals to ensure you have
a continually safe and well set-up bike before every ride, and to help you build up
a relationship of knowledge between you and your Whyte Dealer.
Happy and safe riding,
Whyte design team

2.0: GEOMETRY

The geometry of the full suspension range of Whyte Bikes is available from the
Whyte Bikes website www.whyte.bike
Page 4
WHYTE Service Manual
Table of Contents (continued)
9.1 To replace cable or hose outers.
9.2 To fit a "Dropper" seat-post with internal cable.
10.1 Location of Bosch Battery On/Off Button.
10.2 Location of Bosch Battery Charge Port.
2019