Table Of Contents - Whyte E-150 Operating Instructions And Owner's Manual

1.0 Introduction
2.0 Geometry
3.0 Preparations for riding:
3.1
3.2
3.3
3.4
3.5
4.0 Safety.
5.0 Lubrication:
5.1
5.2
6.0 Servicing The Rear Suspension:
6.1
6.2
6.3
7.0 Servicing The Whyte Modular Dropout Systems:
7.1
7.2
8.0 Servicing the Whyte Inter Grip Seat Clamp
2019

Table of Contents

Making Adjustments
Whyte Inter Grip Seat Clamp Adjustment
Set Up Of Fork
Set Up Of Rear Damper
Suspension Tuning Log
Whyte Inter Grip Seat Clamp
General Lubrication
Removing the Rear Shock and Swinging Arm.
6.1.1 Remove the Rear Shock only.
6.1.2 Remove the other rear suspension parts.
6.1.3 Remove the chain-stay & bearings from the Main Frame
Stripping and Re-assembling Other Rear Suspension Bearings
6.2.1 Extraction of Bearings
6.2.2 Insertion of Bearings
6.2.3 Re-Assembly of Shield Washers / Spacers
Re-assembling the Rear Suspension
6.3.1 Re-Assembly of the Rear Suspension.
6.3.2 Insert the bearings into the Main Frame, plus
assemble the chain-stays to the Main Frame.
6.3.3 Re-assemble the other rear suspension parts.
6.3.4 Re-assemble the Rear Shock into the Main Frame.
6.2.4: Application of "SKF LGAF 3E" or "Castrol Optimol T"
Anti-Fret Pastes.
Disassembly of Modular Rear Dropouts.
7.1.1 Shimano E-Thru
7.1.2 SRAM Maxle 148mm
Reassembly of Modular Rear Dropouts.
7.2.1 Shimano E-Thru
7.2.2 SRAM Maxle 148mm
Page 3