1. Manuals
  2. Brands
  3. Whyte Manuals
  4. Bicycle
  5. KYNAMIC
  6. Quick start manual

Whyte KYNAMIC Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EN | ENGLISH
Attention!
Read this manual before your first ride
QUICK START GUIDE
Version 1.2
This document is not the complete manual for your EPAC. This manual contains important safety, performance and service information. Read it before you take the first ride on your new
electric bicycle (eBike), and keep it for reference. Additional safety, performance and service information for specific components such as suspension or pedals on your eBike, or for
accessories such as helmets or lights that you purchase, may also be available. Make sure that your authorised retailer has given you all the manufacturers' literature that was included with
your eBike or accessories. This manual can be downloaded from our website to access all the updated relevant information about the use and care of this EPAC and it's components, as well
as information about spare parts, apps, warranty terms, etc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KYNAMIC and is the answer not in the manual?

Questions and answers

Related Manuals for Whyte KYNAMIC

Summary of Contents for Whyte KYNAMIC

  • Page 1 EN | ENGLISH Attention! Read this manual before your first ride QUICK START GUIDE Version 1.2 This document is not the complete manual for your EPAC. This manual contains important safety, performance and service information. Read it before you take the first ride on your new electric bicycle (eBike), and keep it for reference.
  • Page 2 This document is not the complete manual for your EPAC. This manual is a Quick Start Guide to get you out riding quickly and safely. Additional safety, performance and service information for specific bicycles and thier components can be found here https://whytebikes.com/pages/documents All of Whytes manuals can be downloaded from our website to access all the updated relevant information about the use and care of your EPAC.
  • Page 3 REGISTER Registering your bike is the official way for us to welcome you into the Whyte Bikes family. It’s also an important step in activating your bike’s warranty. If you ever have an issue, we’ll be able to handle your case efficiently and get you back riding as soon as possible. It’s...
  • Page 4 INDEX 01 INTRODUCTION PAGE 05 1.1 MANUAL INFO & SYMBOLS ................... 1.2 PRODUCT WARNINGS ..................... PAGE 06 PAGE 07 1.3 RIDER ADVICE ......................02 RIDE INFO PAGE 08-09 2.1 OUT THE BOX ......................2.2 PRE-RIDE CHECK....................... PAGE 10-11 PAGE 12 2.3 SAFETY EQUIPMENT....................

  • Page 5: Manual Symbols

    Whyte bike, DO NOT RIDE IT and instead arrange for a professional bicycle mechanic at your local Whyte retailer to do the job CAUTION! correctly.

  • Page 6: Product Warnings

    If you choose to install an accessory on Any attempt to modify the Drive unit may result in serious personal your Whyte Bike such as a child carrier or a trailer, make sure it is injury or death, and will immediately void the bicycle’s warranty.
  • Page 7 • Additional weight can affect braking distances. Consider your speed your bikes capabilities. Your Whyte eBike and Kynamic hub motor system has when entering corners and trail features. Pedalling through corners or trail not been design for offroad terrain or MTB graded trails. Riding your bike in features will increase your speed and may exceed the riders control.
  • Page 8 WARNING: If you are in any doubt about your ability to safely service or repair your Whyte bike, DO NOT RIDE IT and instead arrange for a professional bicycle mechanic at your local Whyte retailer to do the job correctly.
  • Page 9 02 - RIDE INFO 2.1 Out the Box When unboxing your new Whyte eBike you will find a Whyte Charger Case containing numerous manuals (Including this manual). Please ensure you read all relevant literature prior to assembly or riding your eBike. Relevant manufacturer manuals for your eBikes components will be provided.

  • Page 10: Pre-Ride Check

    Whyte retailer to have the wheel trued. (Frequency: Before every ride) • Ensure there is ample battery charge before setting off (Frequency: Before Whyte recommends that at least the index fingers have the range to reach the every ride) brake levers easily. Brake lever adjustment can be achieved - please consult brake manufacturers manuals or by consulting a Whyte retailer for further •...
  • Page 11 Are the wheels locked? If not, then the extensions can cut you and cause serious injury in an otherwise brakes are not working properly. Do not ride the bike until you have minor accident. consulted your Whyte retailer. WARNING • Wheel attachment.

  • Page 12: Safety Equipment

    Please ensure all reflectors are securely fastened, clean, clear of any obstructions and exhibit no signs of damage. Do not remove reflectors from your Whyte bike, they have been installed to meet current laws and are fitted for the users safety.

  • Page 13: After A Crash

    Check the seat, seat-post, stem, and handlebars are still in the correct orientation. NEVER try to correct the position by force. Loosen fixings/bolts If you discover any damage to your Whyte bike or its components, STOP using with the correct tools and reposition before re-tightening (Ensure you refer to the bicycle immediately! the specified torque settings).
  • Page 14 All legal requirements regarding the bike components stated by road traffic licensing authority must be adhered to e.g. lights, reflectors and helmets. • Whyte do not offer representation, warranty, or liability for use of youR eBike/pedelec • Tampering with your eBike/pedelec may result in a legal offence and...
  • Page 15 03 - REGULATIONS & USAGE 3.2 Usage Classification To define the intended use of your bike please contact your Whyte retailer. All Whyte bikes have been tested and classified accordingly. The purpose of this classification is to define the test requirements comply with the respective stress loads.
  • Page 16 3.3 Usage Categories INFO Usage categories meet 1 - ROAD Whyte pedelecs of the category ‘ ’ have been designed to be ridden on hard- safety standards ‘DIN EN ISO packed road surfaces where the wheels remain in constant contact with the surface.
  • Page 17 03 - REGULATIONS & USAGE 3.4 Ride Conditions WARNING - Conditions on the road, path or trail you are riding on can present sudden hazards. Avoid or exercise caution by slowing your speed on dangerous terrain, including: • Potholes • Train tracks •...

  • Page 18: System Control

    Whyte & Kynamic Thank you for choosing the new Kynamic powered Whyte bike. The illustration above depicts the key Kynamic components equipped with your eBike. Please note the products and specifications stated in this manual may be updated without prior notification.
  • Page 19 Unit-e System. The term charger is used in these instructions to mean all original Kynamic chargers from the system generation. The term eBike battery is used in these INFO - Users who are not professionally trained for bicycle...
  • Page 20 05 HMI BAR MOUNT 5.1 On/Off CAUTION - Before your ride: • Regardless of your experience level, you should read the User Manual carefully and carry out all important safety checks. • The eBike system can only operate when the battery is sufficiently charged.

  • Page 21: Home Screen

    05 HMI BAR MOUNT 5.2 Home Screen HOME SCREEN Home Screen Please study the ‘Home Screen’ illustration to the right to fully understand the data being displayed. It is very important that these instructions are followed and understood to operate your eBike safely. Failure to operate the eBike in a safe and controlled manner can lead to accidents, putting the rider and others at risk.

  • Page 22: Walk Assist

    05 HMI BAR MOUNT 5.3 Data Clearance & Assist Modes DATA CLEARANCE Data clearance You can clear and reset the subtotal mileage (TRIP), average speed (AVG), and maximum speed (MAX). After the HMI controller has been powered for 10 seconds, navigate to Function 1 screen, press and hold the Mode button (2) until the CLEAR DATA window appears.

  • Page 23: Light Function

    05 HMI BAR MOUNT 5.3 Data Clearance & Assist Modes ASSIST LEVEL Assist Level Switch In the normal operation, short press Up / Down button (4/5) to switch SWITCH increase and decrease assist level. Light Function If the eBike is equipped with a front or rear light, from the home screen press and hold the Up (4) button for 3 seconds to turn them on.

  • Page 24: Battery Power

    05 HMI BAR MOUNT 5.4 Charge Level & Errors BATTERY POWER Battery Power Indicator Battery power information is displayed at the top left of the HMI screen . The battery icon is divided into 5 bars indicating the State of Charge (SOC) value. During start up the battery icon will flash until a connection is established.
  • Page 25 - Please turn on and off for a few times - Please turn on and off for a few times - Please contact your nearest service shop - Please return the controller to Whyte/Kynamic Service Center Battery current over protection setting...
  • Page 26 FW is damaged or lost in the controller - Please repeat update firmware for a few times - Please repeat update firmware for a few times - Please return the controller to the service shop - Please return the controller to Whyte/Kynamic Service Center...
  • Page 27 06 HMI INTEGRATED 6.1 On/Off CONTROLS CAUTION - Before your ride: • Regardless of your experience level, you should read the User Manual carefully and carry out all important safety checks. • The eBike system can only operate when the battery is sufficiently charged.
  • Page 28 06 HMI INTEGRATED 6.2 Home Screen HOME SCREEN Home Screen Please study the ‘Home Screen’ illustration to the right to fully understand the data being displayed. It is very important that these instructions are followed and understood to operate your eBike safely. Failure to operate the eBike in a safe and controlled manner can lead to accidents, putting the rider and others at risk.
  • Page 29 06 HMI INTEGRATED 6.3 Data Clearance & Assist Modes DATA CLEARANCE Data Clearance You can clear and reset the subtotal mileage (TRIP), average speed (AVG), and maximum speed (MAX). After the HMI controller has been powered on, press down the Power/Mode button (1), at the bottom of the screen a timing bar will appear and track across the screen.
  • Page 30 3 being full power mode. Take care riding in assist level 3 if this is your first time riding your eBike. Whyte recommends always starting your ride in assist level 1. Please note, riding the bike in assist level 3 will drain you eBikes battery much faster that assist level 1 or 2.
  • Page 31 06 HMI INTEGRATED 6.4 Charge Level & Errors BATTERY POWER Battery Power Indicator Battery power information is displayed at the top left of the HMI screen . The battery icon is divided into 5 bars indicating the State of Charge (SOC) value. During start up the battery icon will be flashing whilst a connection is established.

  • Page 32: Technical Data

    The Kynamic eBike chargers are intended exclusively for charging Kynamic eBike batteries and must not be used for any other purpose. WARNING - There is a risk of fire due to the charger heating up during charging.

  • Page 33: Charging Instructions

    Whyte retailer for diagnosis. • Do not leave batteries charging for more than 24 hours, if the charging cannot be completed in 8 hours, contact your nearest Whyte retailer to have a battery health check.
  • Page 34 07 CHARGING 7.2 Charging Instructions Charge Port Location Your Whyte eBike’s charge port can be located where the seat-tube meets the down-tube. The charge port is sealed by a rubber cover. For access use the raised finger tab to lift the rubber cover.
  • Page 35 It is always best practice to charge your bike after each ride. Charging before storing your bike will help improve the life span of the battery. If your Whyte eBike is going to be stored for an extended period it is recommended that the battery is charged to 30-60% battery capacity.
  • Page 36 Please return Kynamic eBike components that are no longer usable free of charge to a Whyte authorised For proper treatment, recovery and recycling; please dispose of all WEEE bicycle retailer or to a recycling facility.
  • Page 37 There is a risk of the eBike battery catching fire, e.g. as a result of a short circuit. This risk continues to apply for any Kynamic eBike battery that has ever been opened, even at a later point in time.

  • Page 38: Range & Care

    If you have during a trip. However, as a general rule: any questions and for further information, contact an authorised Whyte bike retailership. Do not immerse any components, including the drive unit, in –...
  • Page 39 Whyte retailer. They will help you to dispose of it properly. Do not ship batteries if the housing is damaged or the eBike battery is not Please return batteries that are no longer usable to an authorised Whyte fully functional. Use only the original Kynamic eBike battery packaging when bicycle retailer.

  • Page 40: Hub Motor

    09 HUB MOTOR 9.1 Product Information Operation INFO: The A-weighted emission sound pressure level at the driver Please observe the operating instructions of the control unit and, if necessary, ears is less than 70 dB(A). additional components from the system generation. Notes on Cycling with Your eBike When does the drive work? The drive assists you only when you are pedalling.
  • Page 41 09 HUB MOTOR 9.1 Product Information PLEASE NOTE: The rear disc brake must be installed with specific M5x8-10mm TORX screws and tightened to 4Nm. WARNING! When removing or installing the rear wheel make sure the power cable has been disconnected to avoid accidents.
  • Page 42 Please return Kynamic eBike components that are no longer usable free of charge to an authorised Whyte bicycle retailer or to a recycling facility.

  • Page 43: Declaration Of Conformity

    WRHEO11SV1-1, WRHEO12MV1-1, WRHEO13LV1-1, WRHEO1L0XSV1-1, WRHEO1L1SV1-1, Whyte Content: https://whytebikes.com/pages/documents WRHEO1L1SV1-1, WRHEO1L2MV1-1, WERHEO21SV1-1, WERHEO22MV1-1, WERHEO23LV1-1, WERHEO24XV1-1, WERHEO2L0XSV1-1, WERHEO2L1SV1-1, WERHEO2L2MV1-1, WERHEO21SV1-2, WERHEO22MV1-2, WERHEO23LV1-2, WERHEO24XV1-2, Whyte UK retailers: https://whytebikes.com/pages/retailer-locator WERHEO2L0XSV1-2, WERHEO2L1SV1-2, WERHEO2L2MV1-2, WERHEO31SV1-1, WERHEO32MV1-1, WERHEO33LV1-1, WERHEO34XV1-1, WERHEO3L0XSV1-1, WERHEO3L1SV1-1, Whyte International retailers: https://whytebikes.com/pages/ WERHEO3L2MV1-1, WERHEO31SV1-2, WERHEO32MV1-2, WERHEO33LV1-2, WERHEO34XV1-2,...

  • Page 44: Warranty

    11 WARRANTY Whyte Bikes Ltd warrants with the purchaser of a new Whyte bike, or a Whyte Certified Refurbished bike, that the frame will be free from defects in materials and workmanship for a period of two years from the date of purchase. The duration of the limited frame warranty can be extended to four years by registering your purchase online (excluding Whyte Certified Refurbished bikes).
  • Page 45 12 NOTES...
  • Page 46 12 NOTES...
  • Page 47 12 NOTES...

  • Page 48: Quick Start Quide

    Quick Start Quide Version 1.2...

Table of Contents