Introduction - Whyte G-150 Works SCR Supplementary Service Manual

7.0 Servicing the Whyte Modular Dropout Systems:
7.1 Disassembly of Modular Rear Dropouts
7.1.1 Shimano E-Thru
7.1.2 SRAM Maxle 142mm
7.2 Reassembly of Modular Rear Dropouts
7.2.1 Shimano E-Thru
7.2.2 SRAM Maxle 142mm
7.3 Rear Derailleur Set-up
8.0 Servicing the Whyte Inter Grip Seat Clamp
9.0 Fitting Internal Cables & Hoses.
9.1 To replace cable or hose outers.
9.2 To fit a "Dropper" seat-post with internal hose.
10.0 Torque Settings.

1.0: INTRODUCTION

Thanks for choosing to purchase this Whyte product. We hope you will enjoy all the benefits
its advanced design and engineering will bring to your riding experience.
This manual will guide you through the set-up, safety and maintenance procedures that are
specific to your Whyte bike. For other more general information, we strongly advise that
you also read thoroughly the General Instruction Manual that is also supplied with your new
bike.
Also, please note that the specification of all the components that are fitted to your bike as
standard may be obtained from the Whyte Bikes Brochure or alternatively from the Whyte
Bikes website www.whytebikes.co.uk
Please remember, if you are in any doubt about your ability to safely service or repair your
Whyte bike, do not ride it and instead arrange for a professional bicycle mechanic at your
local Whyte dealer to do the job correctly.
Bundled with this manual, are the respective manufacturers instructions and manuals for
the branded parts that are fitted to your Whyte bike. Please take time to study all the rele-
vant instruction manuals to ensure you have a continually safe and well set-up bike before
every ride, and to help you build up a relationship of knowledge between you and your
Whyte Dealer.
Happy and safe riding,
Whyte design team. April 2014.
Page 4
WHYTE Service Manual
Table of Contents (continued)
2015 Edition 1