Introduction; Geometry; Preparations For Riding; Making Adjustments - Whyte e-MTB HardTail Series Service Manual

1.0: INTRODUCTION

Thanks for choosing to purchase this Whyte product. We hope you will enjoy all the benefits its advanced design and engineering
will bring to your riding experience.
This manual will guide you through the set-up, safety and maintenance procedures that are specific to your Whyte bike. For
other more general information, we strongly advise that you also read thoroughly the General Instruction Manual that is also
supplied with your new bike. It is also available to download at www.whyte.bike
Also, please note that the specification of all the components that are fitted to your bike as standard may be obtained from the
Whyte Bikes website www.whyte.bike
Please remember, if you are in any doubt about your ability to safely service or repair your Whyte bike, do not ride it and instead
arrange for a professional bicycle mechanic at your local Whyte dealer to do the job correctly.
Bundled with this manual, are the respective manufacturers instructions and manuals for the branded parts that are fitted to
your Whyte bike. Please take time to study all the relevant instruction manuals to ensure you have a continually safe and well
set-up bike before every ride, and to help you build up a relationship of knowledge between you and your Whyte Dealer.
Happy and safe riding,
Whyte design team.

2.0: GEOMETRY

The geometry of the Whyte Bikes e505, e504 and e506 is available from the Whyte Bikes website www.whyte.bike

3.0: PREPARATIONS FOR RIDING

3.1: MAKING ADJUSTMENTS

Please refer to the specific component manufacturers manual or published technical information about adjusting the compo-
nents on your Whyte bike. Instructions may be downloaded from the relevant manufacturer's internet site, as shown in the
table below. In addition, make sure you download and read and understand the recommendations contained in the Whyte Bikes
General Instructions Manual, available to Download at www.whyte.bike
CAUTION! If you are uncertain in any way, about making adjustments to any components on you Whyte bike, then DO
NOT RIDE YOUR BIKE.
Contact your Whyte dealer who will be able to advise you on how to go about setting up you Whyte bike for riding, and or mak-
ing adjustments to the components fitted to your Whyte bike.
Bosch eBike Systems www.bosch-ebike.biz
DT Swiss www.dtswiss.com
Easton www.eastonbike.com
Formula www.formulahubs.com
Fox www.foxracingshox.com
Joytech www.joytech.co.tw
Maxxis www.maxxis.com
Race Face www.raceface.com
Schwalbe www.schwalbe.com
Shimano www.shimano.com
SR Suntour www.srsuntour-cycling.com
SRAM www.sram.com
Tektro www.tektro.com
WTB www.wtb.com