Whyte E-150 Operating Instructions And Owner's Manual page 25

Remove the Rear Wheel and using the Torque Wrench, tighten the M4 Countersunk
Head Screw (3) to the correct Torque as specified in Section 10.0. Also tighten the
M5 Countersunk Head Screw (2). DO NOT OVERTIGHTEN, since the thread of the
Screws (2) & (3) are very small. Finally, if necessary, re- adjust the SRAM Maxle
Rear Axle as per the SRAM User Manual 95-4315-004-000.
Item
1
2 Rear Derailleur Hanger, for Shimano E-Thru Direct Mount (Grey Colour)
3
4
Page 24
WHYTE Service Manual
Figure 11: Whyte Dropout Assembly,
Description
M4 x 16mm long Countersunk Head Screw
M4 x 8 long Grub Screw.
Axle Nut, for Shimano E-Thru
For Shimano E-Thru
18
2019