Servicing The Rear Suspension; Whyte Inter Grip Seat Clamp; General Lubrication - Whyte E-150 Operating Instructions And Owner's Manual

5.0: LUBRICATION
Please refer to the Whyte General Instruction Manual for guidance about lubricating
many of the components on your Whyte bicycle.
For the range of bicycles contained in this Supplementary Service Manual, there is
also the following specific guidance:

5.1: WHYTE INTER GRIP SEAT CLAMP

Item Description
M6 x 30mm
1
Capscrew
5.2: GENERAL WHYTE LUBRICATION
For the correct lubrication regime and maintenance of all parts on a Whyte bicycle,
please refer to the specific component manufacturers detailed instructions bundled
with this manual or for further information visit the specific manufacturers website.

6.0: SERVICING THE REAR SUSPENSION

6.1: Remove the Rear Shock, Links & Swinging Arm:
Tools Required:
Page 10
WHYTE Service Manual
Figure 2: Capscrew Lubrication
SKF LGEP2 or Castrol Spherol AP3 or Finish
Line Teflon White Lithium Complex grease
2x 4mm Hex Key
1x 5mm Hex Key - Ball ended
1x 6mm Hex Key
1x 8mm Hex Key
2x T-25 Torx® Keys
Lubricant
Lubrication
Interval
Once a Month
2019