Inter Grip Seat Clamp Service; Complex Grease - Whyte E-150 Operating Instructions And Owner's Manual

Item: Description
1 M6 x 30mm Capscrew
2 Plain Sleeve
3 'O' ring
4 Grip Pad
5 Threaded Sleeve
6 Main Frame
7 Seat Post
8.0: WHYTE INTER GRIP
SEAT CLAMP SERVICE
Tools Required:
Hex Keys
flat blade screwdriver
Wrench (Ranging from 3Nm to
15Nm)
or Castrol Spheerol AP3 or Finish
Line Teflon White Lithium

Complex grease

Reference figures 21 to 35. To
service the Inter
clamp, carefully
procedures otherwise there is a
risk of damaging some of the
components.
Especially remove
place the seat-post (7) in the
specified order.
Figures 22 to 23. From the right side of the Main Frame (6) unscrew & remove the
M6 x 30mm long Capscrew (1). Replace that with the longer capscrew and screw
loosely into the Threaded Sleeve (5).
Figures 24 & 25. Push the Threaded Sleeve (5) all the way out of the opposite side of
the Main Frame (6).
Figures 26 to 27. Move to the left side of the Main Frame (6). Place the M6 x 30mm
long Capscrew (1) diagonally through the Grip Pad (4) and onto the Plain Sleeve (2).
Page 26
WHYTE Service Manual
Figure 22
2x 5mm
Small size
Torque
Figure 24
KF LGEP2
Grip seat
Figure 26
follow these
and re-
Figure 21:
Inter Grip Seat Clamp
Figure 23
Figure 25
Figure 27
2019