Related Manuals for Whyte 27C Works
Summary of Contents for Whyte 27C Works
- Page 1 27C Works & 27C Team 29C, 29C S & 29C Team 529, 629 & 729 603, 604 & 605 801, 802, 805 & 806 901, 905 & 909 Supplementary Service Manual 2015 Edition 1...
-
Page 3: Table Of Contents
Whyte Adjustable Dropout System Adjusting the Dropout System Safety. Lubrication: Getta-Grip Seat Clamp 5.1.1: Bolt Up 5.1.2: QR Style Whyte Adjustable Dropout System General Whyte Lubrication Torque Settings: Whyte Adjustable Dropout System & Whyte Rear Derailleur Hanger Notes. 2015 Edition 1 Page 3... -
Page 4: Introduction
Bundled with this manual, are the respective manufacturers instructions and manuals for the branded parts that are fitted to your Whyte bike. Please take time to study all the rele- vant instruction manuals to ensure you have a continually safe and well set-up bike before every ride, and to help you build up a relationship of knowledge between you and your Whyte Dealer. -
Page 5: Geometry
WHYTE Service Manual 2.0: GEOMETRY Fig.1: Geometry 2.1: WHYTE 27C Works & 27C Team Frame Size Medium Large Extra - Large Head Angle 70.0° 70.0° 70.0° Seat Angle 73.5° 73.0° 73.0° Top Tube 580.0mm 595.0mm 610.0mm 403.5mm 403.5mm 403.5mm BB Height*... -
Page 6: 29C S & 29C Team
WHYTE Service Manual 2.1: WHYTE 29C, 29C S & 29C Team Frame Size Medium Large Extra - Large Head Angle 69.3° 69.3° 69.3° 73.0° 73.0° 73.0° Seat Angle Top Tube 612.2mm 627.0mm 640.8mm BB Height* 305mm 305mm 305mm Stand Over... - Page 7 Please refer to suspension set up for information on how to achieve the correct sag of the fork. * BB height with Ø738mm tyres fitted (2.1” / 52-622) 2.2.4: WHYTE 603, 605, 801 & 805 Extra...
- Page 8 WHYTE Service Manual 2.2.5: WHYTE 604, 802 & 806 Frame Size Small Medium Head Angle 68.5° 68.5° Seat Angle 73.5° 73.5° 585.5mm 599.6m Top Tube BB Height* 303.5mm 303.5mm Stand Over 784mm 804mm Wheel Base 1099.1mm 1114.1mm 435mm 435mm Chain Stay Seat Post 30.9mm...
- Page 9 * BB height with Ø717mm tyres fitted (2.25” / 52-584). Whyte 929 has an adjustable rear drop-out, see section 3.4. When fully extended rearwards, this adds 10mm to Chain -stay and Wheelbase lengths. When fully retracted forwards, the reduces Chain-stay and Wheelbase lengths by 10mm.
-
Page 10: Preparations For Riding
Maxxis www.maxxis.com components on you Whyte bike, then DO Prologo www.prologotouch.com NOT RIDE YOUR BIKE. Contact your Whyte dealer who will be able to advise Race Face www.raceface.com you on how to go about setting up you Shimano www.shimano.com Whyte for riding, and or making adjust-... -
Page 11: Getta-Grip Seat Clamp
WHYTE Service Manual 3.2: WHYTE GETTA-GRIP SEAT CLAMP The Getta Grip seat clamp design is a patented design to allow adjustment of the saddle height by either the use of a Quick Release (QR) Lever, or bolt-up method. This manual covers both styles of clamps. - Page 12 Description QR Lever Cam Grub Screw QR Lever Cam Whyte QR Lever Plastic Shim Whyte Main Frame Whyte Seat Clamp Band QR Adjuster Bobbin QR Shaft T-Pad Quick Release Lever Type: Fig.3 No tools required. (Note, refer to the seat-pin manufacturers instructions in conjunction with these notes).
-
Page 13: Set Up Of Fork
To set Sag on the front fork, you need to measure the amount the fork compresses when you sit on the bike in the normal riding position. See the table on the right for our recommendation of front fork sag on your Whyte bike. To achieve this you will need to adjust the air spring pressure inside the fork. -
Page 14: Whyte Adjustable Dropout System
Dropout M6 Washer Plate IMPORTANT SAFETY NOTE: If at any stage you are uncertain about safety or the safe adjustment of the Whyte 19 Dropout System as a whole, or any specific component, please do not ride your bike, and consult your Whyte Dealer for advice. -
Page 15: Adjusting The Dropout System
Tools Required: 5mm A/F Allen Key The Whyte 19 dropout system enables a rider to adjust the bike’s Chain stay length. This allows the rider to tune the handling characteristics to their preference, or when used in conjunction with the Single Speed RH Dropout Plate (7), a single speed drive-train can be used without the need for a chain tensioner device because the dropouts (3,6,7) can be adjusted to tension the chain exactly. -
Page 16: Safety
If at any stage you are uncertain about the safety or safe operation of the bike as a whole, or any specific component, then DO NOT RIDE YOUR WHYTE and instead please consult the specific component manufacturers instruction manual or your Whyte Dealer for advice. -
Page 17: Lubrication
WHYTE Service Manual 5.0: LUBRICATION 5.1: GETTA-GRIP SEAT CLAMP 5.1.1: Bolt-Up Style. Fig.5a Lubrication Fig. 5a: Bolt-Up Lubrication Point Description Lubricant Interval Castrol LM M6 x 25mm Once a Fastener Month equivalent 5.1.2: Quick Release Style. Figure 5.b Figure 5b: QR Lubrication... -
Page 18: Whyte Adjustable Dropout System
Check Once a Month 5.3: GENERAL WHYTE LUBRICATION For the correct lubrication regime and maintenance of all parts on a Whyte bicycle, please refer to the specific component manufacturers detailed instructions bundled with this man- ual or for further information visit the specific manufacturers website. -
Page 19: Torque Settings
WHYTE Service Manual 6.0: TORQUE SETTINGS Whyte Adjustable Dropout System lbs.ft M6 x 14mm Pivot Screw 13 (min) - 15 (max) 9.5 (min) - 11 (max) M6 x 16mm Clamping Screws 13 (min) - 15 (max) 9.5 (min) - 11 (max) Whyte Rear Derailleur Hanger lbs.ft...