Waeco MAGIC Control MTPM-100 Installation And Operation Manual page 72

MTPM-100.book Seite 72 Freitag, 15. Juli 2005 4:37 16
Alarm status
LED
Meaning
colour
Red The pressure of one or
more tyres is less than
50 % of the front or
rear set pressure.
The pressure of one
or more tyres is more
than 150 % of the front
or rear set pressure.
The tyre temperature is
above 85 °C.
MAGIC CONTROL always indicates the most critical status.
If, for example, it detects orange status for one tyre and red status
for another, the LED indicates red status.
If the set pressure for one axle is above 3.59 bar, MAGIC CONTROL
deactivates the excess pressure warning.
Because the maximum measuring range of MAGIC CONTROL is
5.375 bar, 150 % excess pressure of 3.59 bar would be outside the
measuring range.
72
MAGIC CONTROL
Display
First the LED flashes red once
a second for two minutes (0.2 s
on, 0.8 s off), and a beep of the
same frequency sounds for
15 seconds.
Then the LED flashes red twice
per second for a minute and a
beep of the same frequency
sounds for 15 seconds.
The the LED flashes red four
times per seconds and a beep of
the same frequency sounds.
This display remains until the
tyre status improves to orange
or green.
➤ Stop the vehicle immediately
and check the tyres.