Waeco MAGIC Control MTPM-100 Installation And Operation Manual page 50

MTPM-100.book Seite 50 Freitag, 15. Juli 2005 4:37 16
Safety and installation instructions
When connecting to supply line 31 (earth), screw the cable
– To the vehicle's earth bolt with a cable lug and a gear disc or
– To the sheet metal body work with a cable lug and a self-tapping screw
Ensure that there is a good earth connection.
When the negative terminal of the battery is disconnected, all data stored in
the volatile memory will be lost.
The following data must be set again, depending on the vehicle
equipment options:
– Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate
operating instructions.
Observe the following installation instructions:
Caution
The sensor may only be fitted by a qualified workshop.
Secure the parts of the MAGIC CONTROL system installed in the vehicle
in such a way that they cannot become loose under any circumstances
(sudden braking, accidents) and cause injuries to the occupants of
the vehicle.
To prevent damage, when drilling ensure that there is sufficient room for
the drill head to emerge once the hole has been made (2, page 4).
Deburr all drill holes and treat them with a rust-protection agent.
50
MAGIC CONTROL