Maintenance - EdilKamin Italiana Camini IDROPOLIS Installation, Use And Maintenance Manual

Pellet boiler-stove
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 28

MAINTENANCE

Before performing any maintenance, disconnect the applian-
ce from the mains.
Regular maintenance is required for the boiler-stove to fun-
ction correctly.
1
Any problems resulting from lack of maintenance will imme-
diately void the warranty.
N.B.
3
- Any unauthorised modifi cation is forbidden
- Use spare parts recommended by the manufacturer
- The use of counterfeit parts results in the guarantee beco-
ming null and void
2
DAILY MAINTENANCE
Operations must be performed when the boiler-stove is off,
cold and unplugged from the power supply.
Cleaning should be carried out with the aid of a vacuum clea-
ner (see optional page. 52), the whole procedure takes up a few
fi g. A
minutes.
• Open the door, remove the combustion chamber (1 - fi g. B) and
empty the residue out into the ash pan.
• Scrap the combustion chamber with the spatula provided,
removing any obstructions in the openings.
• DO NOT EMPTY THE RESIDUE OUT INTO THE PEL-
LET HOPPER.
• Take out and empty the ash (2 - fi g A) pan into a fi reproof con-
tainer (the ash may still contain hot parts and/or embers).
*
• Vacuum clean the inside of the fi replace, the fi re surface, the
compartment around the chamber where ash falls, and the ash
pan.
• Vacuum the combustion chamber holder, clean the edges where
the combustion chamber is lodged into its seat.
• Clean the glass, if necessary (when cold).
AT LEAST ONCE A DAY ACTION THE CLEANING
BRUSHES OF THE EXCHANGERS (*), EVEN WHILE
THE STOVE IS LIT, USING THE GLOVE PROVIDED:
- Proceed by shaking the cleaning handle positioned under the
grill of the top (fi g. B).
fi g. B
NEVER SUCTION HOT ASH, as this could damage the
suction device and possibly cause a fi re.
ATTENTION:
MAKE SURE THE ASH PAN IS CORRECTLY POSITIO-
NED IN ITS HOUSING (2 fi g. B)
WEEKLY MAINTENANCE
• Clean the hearth (with the tube brush).
• Vacuum the pipe near the electric coil (3 - fi g A).
- 47
-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents