Infopia Finetest Auto-coding Premium Manual page 72

Troubleshooting
Message
The Blood Glucose
Test Meter does not
power on.
Test does not start
after applying blood
sample.
The result is inconsistent.
72
Problem
The test result is higher
than 600mg/dl.
Battery is dead or there is
Generelles
problem with the Blood
Geräteproblem
Glucose Test Meter.
Poor blood sample.
There may be a problem
with the Blood Glucose
Test Strip.
No readings in
memory to display.
No enough readings in
memory to display
designated averages.
Action Required
Check the accuracy of your Blood Glucose
Test Strip by performing a Control Solution
test. If the test results in a normal reading,
re-test your blood sample two or three
times. If "Hi" persists, consult your
doctor immediately.
Change the battery and if the
problem persist, contact your local
representative (contact details: see
last page).
Please insert a new Blood Glucose
Test Strip and perform your test
again.
Please insert a new Blood Glucose
Test Strip and perform your test again.