Infopia Finetest Auto-coding Premium Manual page 53

Caution
1. **VERY IMPORTANT: Correct test unit.
Your Finetest Auto-coding Premium Meter is pre-set to mg/dL or mmol/L as test unit.
A wrong test unit will lead to wrong test result display! Please consult your healthcare
professional if you're not sure which test unit to use. Stored test results are displayed
correctly after re-setting the test unit. See also conversion table on page 75.
2. Without setting the date properly, the average glucose level and the results in memory
will not show proper values. It is recommended to set the meter before use and when
new batteries are installed.
3. Yon can't test your blood glucose while in the setting mode.
4. To turn the meter off during setup, press
Alarm on/off
After pressing and releasing either ▲ or ▼ buttons to turn the
alarm on/off, confirm with
Alarm time
After pressing and releasing either▲ or ▼ buttons to set the
alarm hour and minute, confirm with
Alarm
After programming the number of desired alarms (5 alarms
possible), confirm with
for at least 3 seconds.
Setting the Meter
.
.
.
53