Infopia Finetest Auto-coding Premium Manual page 56

Checking the system with the
Testing procedure
1. Prior to use, shake the bottle gently several times.
2. Invert bottle and discard the first drop of control solution.
3. Wipe the dispenser tip clean.
4. Test strip is inserted fully into the test slot of the Finetest Auto-coding Premium meter.
5. Be sure the code number appearing on the LCD window matches the test strip code on the
strip vial.
6. When the strip sign blinks, press
measuring process appears. Effect: The result is marked.
7. Hold the control vial at an angle with the tip near the end of the test strip. Gently squeeze the
vial and form a small drop. Pick up the meter and touch the end of the test strip to the hanging
drop. Be sure to hold the test strip to the drop until the "beep" sounds.
8. After the "beep" sound, wipe the rest of the drop with tissue or cotton gauze. If the drop is
taken back into the control vial, it is possible to contaminate the whole vial of control solution!
9. The displayed test result should be within the range printed on the test strip vial.
Second application tip : Place a drop on clean aluminum foil, glass or plastic plate and
touch the end of the test strip to that drop. This method is more favorable, in preventing
contamination to the whole vial of control solution
IMPORTANT NOTE : If the Finetest Auto-coding Premium Control Solution test results,
continuously, falls outside the range printed on the vial, the Finetest Auto-coding Premium
system may not be functioning properly. DO NOT use the system to test your blood until you get
a control solution test result that falls within the range. If you continue to have problems, call
your local representative (contact details: see last page).
In the User ID option is activated, the control solution test result is stored, but can only be
recalled after deactivating the User ID option.
56
button once. The symbol
▲ or ▼
control solution
for control solution