Infopia Finetest Auto-coding Premium Manual page 60

Testing Procedure
Step 2
Place your fingertip to the top edge of Finetest Auto-coding Premium Test Strip. The blood
on your finger will automatically draw into the applying channel of the test strip. Allow your
finger to remain until you hear a "beep" sound from the Finetest Auto-coding Premium
Meter. A sample volume of 1.5μl is required.
Correct:
completely
filled
Incorrect:
poorly filled
Caution
1. Very important: Applying channel must be completely filled by blood sample!
2. If the countdown does not start, do not add more blood to the test strip! Discard the test
strip and restart testing.
3. If you do not conduct the test within 3 minutes, the meter will automatically power off to
save battery life. In this case the test procedure should start again from the beginning.
60
correct
incorrect