Infopia Finetest Auto-coding Premium Manual page 62

Testing Procedure
Testing Your Blood - Case of activated User Activity option and User
ID option
Caution
1. If you did not activate the User Activity option and/or the User ID option, Step 4-1 and/or
Step 4-2 procedures are not conducted.
2. Although User Activity option and/or User ID option are activated, if you pull the test strip
out right after the test, you can not move onto step 4, The test result is stored, not under
a specific User ID and only displayed after deactivating the User Id option.
3. Please refer to page 51, if you want to set the User Activity option and User ID option.
62
Step 4-1
If you selected to use the User Activity option during set up,
press up and down button to select the activity that correlates with
your result (refer to p. 48), then press
If you do not select to use user activity option during set up,
press to continue to step 4-2.
Step 4-2
If you selected to use the User ID option during setup, press
button to select the correct User ID, then press
▲ and ▼
.
.