Table of Contents
Advertisement
Description of Current Settings Screen and Information Screen
Initial Screen
Press
Current Settings Screen
Initial Screen
Press
Information Screen
Current Settings Screen
This screen shows the current settings for the machine. Confirm the settings
before operating the collator. After confirming the settings, press OK to display the
Initial screen. (This screen cannot be used to change the settings.)
These icons show the current condition of the bins. Icons appear for any bins being used.
Sheets Present
This icon appears for any bins being used.
Check Icon
This icon appears if the bin has been registered for use by pressing the Check button.
These icons show the current settings for the machine.
Stapler Connection Icon
This icon shows whether or not the stapler is connected.
Double Cycle Function Icon
This icon shows whether or not the double cycle function is active.
Receiving Mode Icon
This icon shows the receiving mode (straight or offset).
Double Feed Detect Function Icon
This icon shows whether or not the double feed detect function is active.
OK Button
After confirming the settings, press this to return to the Initial screen.
Information Screen
This screen is used to maintain the collator. Press OK to return to the Initial
screen.
(This screen may only be used by service personnel. Do not touch any of the buttons
except.)
OK Button
Press this to return to the Initial screen.
Press
The ROM version is indicated.
Service Screen
(For maintenance: See "Service only")
Press this to go to the Initial Setting screen.
This is used when installing the collator.
Control Panel Description
Initial Setting Screen
Any number entered here will not be saved unless OK is pressed.
2109640303B1
2109640303C1
46
Advertisement
Table of Contents
