Table of Contents
Advertisement
Error Icon Appears: No Sheets, Receiving Tray Full
No Sheets: Sheets from one of the bins run out.
Check
There are no sheets in
one of the bins being
used.
* This icon appears if sheets are loaded in a different bin after the checking operation.
* This icon may appear when the detect lever is raised if the sheets are curled or the number of sheets in the bin is ten or
less.
Receiving Tray Full: Receiving tray is full.
Check
Check whether the
receiving tray is full of
collated sets.
The receiving tray full icon appears although the receiving tray is not full:
Check
Check whether collated
sheet is stuck on the rear
guide or backstop in the
receiving tray.
Check whether a strong
light source is affecting
the sensor beam func-
tion. (Check the upper
part of the receiving tray
on the front and rear.)
Check whether the
receiving tray full detect
sensor is covered with
dust.
Causes and Remedies
Load more sheets in the empty bin.
2109640104A1
Causes and Remedies
Remove the collated sets from the receiving
tray.
2109640104B1
Causes and Remedies
Reposition the front/rear guide and the back-
stop in the receiving tray.
2109640104C1
A strong light source can affect the sensor
beam function.
Change the direction of the collator to block
the light source so the light does not affect the
sensor.
2109640104D1
Clean the receiving tray full detect sensor.
2109640104E1
Page
Page 5,6
Page
Page 10
Page
Page 7,8
-
Page 40
30
Advertisement
Table of Contents
