Table of Contents
Advertisement
Offset Receiving
Stacking Area:
Width x Length: 180 x 175 mm
(7.1" x 6.9") or more
Width x Length: 300 x 432 mm
(11.8" x 17.0") or less
Backstop
Front
50 mm (2")
Guides
Initial Screen
Straight Receiving
Stacking Area:
Width x Length: 138 x 175 mm
(5.5" x 6.9") or more
Width x Length: 305 x 432 mm
(12.0" x 17.0") or less
Backstop
Front
Guides
2109630301E1
Receiving Tray
Straight
Offset
Select
2109630301F1
Folded Sheet Size: Non-standard
• Offset Receiving
(1) First, position the backstop. The set the front guides
50 mm (2") away from the edge of the stack.
(2) If the backstop and front guides do not support the
stack, use the support stopper.
• Straight Receiving
(1) Position the backstop and the front guides against the
edges of the sheet as it sits on the receiving tray.
(2) If the backstop and front guides do not support the
stack, use the support stopper.
Set the receiving mode.
• Select the receiving mode (straight or offset) on the Ini-
tial screen.
Start the collating operation.
Important
• Use the preset function when collating folded sheets.
The folded edges will take up more space in the
receiving tray, and the collated sheets may fall over
before triggering a receiving tray full error. (Refer to
page 11.)
20
Advertisement
Table of Contents
