Double Feed Detect Sensor - Horizon Fitness QC-S300 Manual

Maintenance: Double Feed Detect Sensor
If the double feed detect sensor is covered with paper dust, the error icon may appear and the collating operation may
stop even though the collating has been performed properly.
Frequency: Clean if you notice a problem.
Feed Section

Double Feed Detect Sensor

Cleaning the Double Feed Detect Sensor
Turn off the main power switch and unplug
the power cord whenever the double feed
detect sensor is cleaned or replaced.
Turn off the power switch
• Turn off the main power switch on the QC-S300 and
unplug the power cord.
2109640201A1
Clean the double feed detect sensor.
• Clean the double feed detect sensor using the
accessory brush.
2109640203A1
WARNING
38