Calling Up Default Setting/Delete All; Activating Default Setting; Delete All Programmes - TechniSat DigiPal 1 Operating Manual

(Fig. 7-10)
(Fig. 7-11)
All manuals and user guides at all-guides.com
7.5 Calling up factory settings/Delete All
You can return to the original factory (default) settings at any
time. You can also, if the programme list is completely outda-
ted because of changes made by programme providers,
delete this completely, and then perform a new search. Plea-
se note that after you have carried out the Delete function you
must start a search, and must then copy the desired program-
mes from the Total list to the Favourites list.
Use the Menu key to call up the Main Menu.
>
Now use the arrow keys up/down to select the
>
line Settings.
Confirm by pressing OK. The sub-menu Settings
>
will be displayed (Fig. 7-10)
Now use the arrow keys up/down to select the
>
line Factory Settings.
Confirm by pressing OK. The sub-menu Factory
>
Settings will be displayed (Fig. 7-11)
7.5.1 Activating Factory/Default Setting
This function allows you to return to the original default set-
tings, at the same time deleting all your personal settings.
Use the arrow keys up/down to select the line
>
Activate Default Settings.
Confirm by pressing OK.
>
The message "Do you really want to activate default
settings?"will be displayed.
Use the arrow keys left/right to select Yes or
>
No.
Confirm by pressing OK.
>

7.5.2 Delete All Programmes

This function allows you to delete the entire programme
memory.
Use the arrow keys up/down to select the line
>
Delete All Programmes.
Confirm by pressing OK.
>
The message "Do you really want to delete all
programmes?" will be displayed.
Use the arrow keys left/right to select Yes or
>
Abort.
Confirm bei pressing OK.
>
Please also note any messages displayed on screen.
32