Calling Up Default Setting/Delete All; Activating Default Setting; Delete All Programmes - TechniSat DigiPal1 Operating Manual

(Fig. 7-10)
(Fig. 7-11)
7.5 Calling up factory settings/Delete All
You can return to the original factory (default) settings at any
time. You can also, if the programme list is completely outda-
ted because of changes made by programme providers,
delete this completely, and then perform a new search. Plea-
se note that after you have carried out the Delete function you
must start a search, and must then copy the desired program-
mes from the Total list to the Favourites list.
> Use the
> Now use the
line
> Confirm by pressing
will be displayed (Fig. 7-10)
> Now use the
line
> Confirm by pressing
will be displayed (Fig. 7-11)
7.5.1 Activating Factory/Default Setting
This function allows you to return to the original default set-
tings, at the same time deleting all your personal settings.
> Use the
> Confirm by pressing
The message "Do you really want to activate default
settings?"will be displayed.
> Use the
> Confirm by pressing

7.5.2 Delete All Programmes

This function allows you to delete the entire programme
memory.
> Use the
> Confirm by pressing
The message "Do you really want to delete all
programmes?" will be displayed.
> Use the
> Confirm bei pressing
Please also note any messages displayed on screen.
32
key to call up the
.
. The sub-menu
.
. The sub-menu
.
.
.
.
.
to select the
to select the
to select the line
to select or
to select the line
to select or