Please Read This First - TechniSat DigiPal 1 Operating Manual

Receiver for dvb-t programmes
Hide thumbs Also See for DigiPal 1:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com

3 Please read this first

>
Before you start operating the receiver, please check
that all necessary parts have been delivered.
You should have the following:
1 receiver, 1 mains plug/adapter, 1 remote control, 1
operating manual, 1 guarantee card, 2 batteries (1,5V
micro-cells).
>
Insert the batteries supplied in the battery compart-
ment of the remote control unit, taking care to observe
the indicated polarity.
>
Before connecting the receiver, please first read the
safety precautions in Chapter 3.
Chapters 4 and 5 describe connecting the
>
receiver, and adjusting it to the antenna and the
television set.
Chapter 6 describes all the functions required for
>
everyday use, such as programme selection or
volume adjustment.
In Chapter 7 you will find information on how to add
>
new programmes, or how to change the order of
programmes in the list.
>
Technical terms used in the operating manual are
explained in Chapter 8.
Technical data may be found in Chapter 9.
>
>
A trouble-shooting guide to help you find and correct
faults can be found in Chapter 10.
Disposal instructions
The packaging materials used for this unit consist entirely of
recyclable materials. Please ensure that they are disposed of
appropiately, e.g. via the "Dual System" in Germany.
Please note that spent batteries such as those used in the
remote control, as well as any electronic parts, should not be
disposed of in your regular domestic refuse. They should be
disposed of separately, either via your ratailer, or through the
local authorities.
Disconnecting the unit
The unit should be disconnected from the mains power
supply during electrical storms, or when the unit is not in use
for an extended period of time.
6

Advertisement

Table of Contents
loading

Table of Contents