Audio Decoding - TechniSat DigiPal 1 Operating Manual

Receiver for dvb-t programmes
Hide thumbs Also See for DigiPal 1:
Table of Contents

Advertisement

Image material 16:9

Audio decoding:

Audio compression
Audio Mode
Sampling frequencies
Audio parameters:
Output analogue:
Output level L/R
Output impedance
THD
Crosstalk
Volume when switched on Stores last value set
Video parameters:
Output:
Output level FBAS
Output level RED 0,7 Vs-s into 75 Ohms
Output level GREEN
Output level BLUE
Teletext
Teletext Filtering
Reception Teletext data
TV SCART:
Output:
Serial Interface RS 232:
Type
Bit rate
Connector
Function
EPG Data:
Current, following and preview events of current programme
selected
Timer:
32 events, maximum of 1 year in advance
OSD languages:
German, English
Remote Control System:
Subsystem address
Modulation frequency
Infrared wavelength
All manuals and user guides at all-guides.com
Automatically adapted
for 16:9 TV sets (via SCART)
Letterbox filtering for 4:3
TV sets
MPEG-1 & MPEG-2 Layer I
and II
Dual (main/sub), Stereo
32 kHz, 44.1 kHz, 48 kHz,
0,5 V r.m.s. (nominal)
600 Ohms
> 60 dB (1 kHz)
< - 65 dB
1 Vs-s into 75 Ohms
0,7 Vs-s into 75 Ohms
0,7 Vs-s into 75 Ohms
corresponding to ETS 300 472
Standard
(FBAS) corresponding to
ITU-R BT.653-2 lines: 6-22
and 320-335
FBAS nd RGB
RS 232, bi-directional
115 kBit/s
D-SUB socket, 9 pin
Update for operating software
RC-5
10 (SAT 2)
36 kHz
950 nm
35

Advertisement

Table of Contents
loading

Table of Contents