Table of Contents
Advertisement
5.3 Accepting settings / Exiting menus and functions
In some menus and functions the changes made must be accepted manually
in order to save them permanently. If this does not happen, the function or the values that
existed before the change was made will be reset automatically on exiting the menu.
If an Accept field or the green function key with Accept is displayed in the bottom
line of the screen, you can see that the changes made must be saved manually to be
accepted.
By highlighting Accept using the right / left arrow keys and confirming with the
>
OK key or by pressing the green Accept function key, the changes are saved and
you are returned to the next menu level up.
Alternatively:
>
Press the Return button.
A request appears asking whether the changes you made should be applied.
Use the right / left arrow keys to highlight Yes or No and confirm using the OK
>
button.
Depending on your selection, the changes will now be saved or discarded and you are
returned to the next menu level up.
Alternatively:
Press the Menu button to leave the menu directly.
>
The settings that need to be saved manually will be reset in this case.
If the green function key with Accept is not displayed on the bottom line of the
screen, the changes are saved automatically on exiting the menu.
5.4 Changing a setting
You can apply settings by means of arrow selection, using the selection list, the
numeric keypad and the virtual keypad. The television specifies the method that can
be used to change a highlighted setting. You can see this from the following displayed
symbols:
Arrow selection method (Point 5.4.1)
-
Arrows are shown on the left or right edge of the highlight.
Arrow selection method (Point 5.4.2)
-
The symbol is shown on the right edge of the highlight.
Numerical keypad method (Point 5.4.3)
-
Virtual keypad (Point 5.4.4)
-
The symbol is shown on the right edge of the highlight.
17
Advertisement
Table of Contents
