Two Discrete Lengths (Parameter L2)
This option decodes only those codes containing two selected lengths. For example, when you want to scan only Code
39 symbols containing 2 or 14 characters, scan the following bar code and then "0", "2", "1" and "4" bar codes using the
Imager Keypad Number
Symbols.
To begin setting two discrete lengths, scan this Two Discrete Lengths bar code:
Next, scan four numeric bar codes that correspond to the desired value. Single digit numbers must have a leading
zero. To correct an error or to change a selection, scan Cancel on the Imager Keypad Number Symbols page.
Length Within Range
This option decodes a code type within a specified minimum and maximum range. For example, when you want to
scan only Code 39 symbols containing between 4 and 12 characters, scan the "Code 39 Length Within Range" bar
code and then "0", "4", "1" and "2" bar codes using the
Imager Keypad Number
Symbols.
To begin setting lengths within a range, scan this Length Within Range bar code:
Next, scan numeric bar codes that correspond to the desired value. Single digit numbers must have a leading zero. To
correct an error or to change a selection, scan Cancel on the Imager Keypad Number Symbols page.
Any Length
This option decodes Code 39 bar codes containing any number of characters.
To set any length, scan this Any Length bar code:
2 - 45