Disable Wi-Fi Notifications And Set Wlan Radio Sleep Parameter; Connect To An Ethernet Network - Honeywell Dolphin CH80 User Manual

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap and hold the name of a connected network, and then tap Modify network.
4. Tap Advanced options.
5. Under Proxy, tap None to open menu, and then select Manual.
6. Enter the proxy settings for the network.
7. Tap Save.

Disable Wi-Fi Notifications and Set WLAN Radio Sleep Parameter

By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Select a setting to modify:

Connect to an Ethernet Network

To connect the computer to an Ethernet network, you need a CN80 Ethernet Home
Base or a CN80 Net Base.
1. Make sure the base is connected to your Ethernet network.
2. Place the computer in the base.
3. Swipe up from the bottom of the Home screen to access all apps.
4. Tap Settings
5. Tap Ethernet.
6. (Optional) To assign a static IP address.
70
> WLAN. The list of available Wi-Fi networks appears.
> WLAN. Verify the WLAN radio is turned On.
. Configure Wi-Fi menu appears.
• Tap the Network notification to toggle the setting On or Off.
• Tap Keep WLAN on during sleep, and then select either Always, Only when
plugged in or Never.
> Ethernet. The Ethernet setting is turned On by default.
The Ethernet connection screen shows the current Ethernet connection. By
default, the computer assumes a DHCP connection, and that your network has
assigned an IP address automatically. If DHCP is working, the Ethernet base
should indicate that communication with the network is occurring.
a. Tap DHCP and then select Static from the list.
Dolphin CN80 Mobile Computer