Two Discrete Lengths (Parameter L2); Length Within Range; Any Length - Honeywell Marathon Programming Manual

Hide thumbs Also See for Marathon:
Table of Contents

Advertisement

Two Discrete Lengths (Parameter L2)

This option decodes only those codes containing two selected lengths.
For example, when you want to scan only Codabar symbols containing 2 or 14 characters, scan the Codabar Two
Discrete Lengths bar code and then "0", "2", "1" and "4" bar codes using the
Imager Keypad Number
Symbols. Default
= 55.
To begin setting two discrete lengths, scan this Codabar Two Discrete Lengths bar code:
Next, scan four numeric bar codes that correspond to the desired value. Single digit numbers must have a leading
zero. To correct an error or to change a selection, scan Cancel on the Imager Keypad Number Symbols page.

Length Within Range

This option decodes a code type within a specified minimum and maximum range. For example, when you want to
scan only Codabar symbols containing between 4 and 12 characters, scan the Codabar Length Within Range bar code
and then "0", "4", "1" and "2" bar codes using the
Imager Keypad Number Symbols
.
To begin setting lengths within a range, scan this Codabar Length Within Range bar code:
Next, scan numeric bar codes that correspond to the desired value using the Imager Keypad Number Symbols. Single
digit numbers must have a leading zero. To correct an error or to change a selection, scan Cancel on the Imager
Keypad Number Symbols page.

Any Length

This option decodes Codabar bar codes containing any number of characters.
To set any length, scan this Codabar Any Length bar code:
2 - 60

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents