CT40 Series powered by Android™ Quick Start Guide CT40-A-EN-QS-01 Rev E 06/20...
Note: CT40-L0N/CT40P-L0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for...
Mobile Computer Features Imager Window (LED/Laser Aperture) Speaker Microphone Scan Status LED Front Facing Camera (model dependent) Battery Status/ Power Button Notification LED Push-to-Talk Touch Panel Button (model dependent) Scan Button Scan Button Microphone Speaker...
Note: Hand strap not shown. Camera Lens Laser Safety and Flash Label Location BLE port In (model dependet) BLE Speaker Out (model dependent) Volume Button Scan Button SIM Card Door MicroSD Card Door USB, Type C (model dependent) Audio Jack Pin (model dependent) I/O Connector...
Install a microSD Card (Optional) Note: Format the microSD card before initial use. Note: Always power off the computer before attempting to install or remove a card.
Install a microSIM Card Note: Phone feature is only available on CT40-L1N/CT40P-L1N models. On all models, the SIM slot supports use of a UICC card for NFC Secure Element NFC link encryption. Note: Always power off the computer before attempting to install or remove a card.
Configuration number (CN) is located on the label in the battery well of the mobile computer. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Nous recommandons l’utilisation de batteries Li-ion de la marque Honeywell.
4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration barcode or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled).
Press and hold the Power button until the options menu appears. Touch Swap Battery and follow the on-screen instructions. Once you replace the battery, press the Power button. Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time.
About the Home Screen Notification / Status Bar Home Screen Panel Favorites Tray Search Bar Navigation Buttons To learn how to customize the Home screen, see the user guide.
Navigation and Function Buttons Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Touch the front (on-screen) Scan button to trigger the scanner. Volume Press the top of the button to raise the speaker volume.
About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle.
Sync Data To move files between your CT40 and a computer: Connect the CT40 to your computer using a USB charge/ communication accessory. On the CT40, swipe down from the top of the screen to see the notifications panel. Touch the Android System notification twice, to open the options menu.
Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. Press and hold the Power button until the options menu appears.
Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.