•
•
•
Configure Proxy Settings for a Wi-Fi Network
If you need to connect to network resources through a proxy server, you can
configure settings for the proxy server for each Wi-Fi network you add. By default,
the Wi-Fi networks you add are not configured to connect through a proxy server.
Note: Proxy settings apply only to the Wi-Fi network you modify. You must change proxy
settings for each network requiring a proxy server.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap and hold the name of a connected network, and then tap Modify network.
4. Tap Advanced options.
5. Under Proxy, tap None to open menu, and then select Manual.
6. Enter the proxy settings for the network.
7. Tap Save.
Disable Wi-Fi Notifications and Set WLAN Radio Sleep Parameter
By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Select a setting to modify:
Connect to an Ethernet Network
To connect the computer to an Ethernet network, you need an eHomeBase or
NetBase.
62
To remove a network from your saved list, tap and hold the network name and
select Forget network. You can do this for networks you no longer use.
To modify a network from your saved list, tap and hold the network name and
select Modify network. You can do this if you changed your network password.
To view a list of only your saved networks, tap
networks.
> WLAN. The list of available Wi-Fi networks appears.
> WLAN. Verify the WLAN radio is turned on.
. The Configure Wi-Fi menu appears.
•
Tap the Network notification to toggle the setting on or off.
•
Tap Keep WLAN on during sleep, and then select either Always, Only when
plugged in or Never.
, and then select Saved
Dolphin CT60 Mobile Computer