Commissioning; Making The Plant Ready For Operation - Kessel INNO-CLEAN Technical Description, Installation, Operating And Maintenance Instructions

The fully biological septic system for domestic sewage
Hide thumbs Also See for INNO-CLEAN:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 92
Instruction / hand-over
The chapter "Safety instructions" must be heeded! (p. 2)
Commissioning is carried out by a specialised firm or by an aut-
horised KESSEL agent (at an additional charge).
The following persons should be present for the hand-over:
- Person authorised to perform the acceptance on behalf of the
building owner
- Specialised firm
In addition, we recommend the participation of operating per-
sonnel/operator, waste disposal contractor
Overview instruction:

5. 1. Making the plant ready for operation

5. 2. Checking the plant
5. 3. Instruction based on the installation and operating in-
structions
5. 4. Drawing up the handover certificate. (see chapter 13)
Once the instruction is completed, the plant must be made
ready for operation.
5.1 Making the plant ready for operation
Prior to commissioning, the plant must be completely cleaned
(including inlets and drains); solids and coarse particles must
be removed.

5. Commissioning

Both chambers of the plant must be filled UP with clear water
to a height of 1.20 m.
Display/indicator panel
Movement keys/direction keys for guidance
through the program menu
Enter key/OK key
Back key/ESC key
Pilot lamp indicating readiness for operation
Pilot lamp for malfunction message
Mains power supply cable
Mains connection compressor
Connection compressed air sensor
Connection options for external signal
generator
Connection for valve block
Connecting socket for floating contact
0.
Systemstart
System start
Systemdiagnose
System diagnostic
0.1
0.2
0.3
0.4
System information
1.5
Systeminfo
Time:
Uhrzeit:
20:45
20:45
Schwimmer: S1
S2
Floater: S1
Events
Main power failure
Ereignisse:
Netz ausfall
Normal phase
Normalphase
der Anlage fragt das Steuergerät nach vier Grundeins
I
114
Bewegungstasten / Richtungstasten kann die gewünschte
ü
einen Markierungsbalken gekennzeichnet werden und die Anschließende
d
V
Sprache
Language
deutsch
französisch
German
englisch
French
English
Datum/Uhrzeit
Date/Time
Datum
Date
01.01.2009 Uhrzeit
01.01.02009 Time
12:00
12:00
Klassen
Classes
C
D
Nominal Size
Nenngrößen
EW4
EW6
EW8
EW10
...
EW24
die Frage nach

Advertisement

Table of Contents
loading

Table of Contents