General; Area Of Application; Description Of System - Kessel INNO-CLEAN Technical Description, Installation, Operating And Maintenance Instructions

2.1 Area of application

IINNO-CLEAN , the septic system from KESSEL, is a clea-
ning unit for domestic wastewater in keeping with DIN 4261
Part II / EN 12566. It is not envisaged for precipitation and
animal husbandry and swimming pool wastewater. This sep-
tic system biologically cleans domestic wastewater and au-
tomatically adapts to the quantities arising. The wastewater
is collected and cleaned in a plastic tank.
This tank is envisaged for trench shoring in the ground. A
control unit automatically regulates aeration and agitation. It
is envisaged for unobstructed installation in frost-protected,

2.2 Description of system

KESSEL-INNO-CLEAN
The control unit is located inside a frost-free, flood-proof and
dry room. The plastic tank inside of which the purification pro-
cess is taking place is installed in the ground outside the buil-
ding.
® consists of two main segments.

2. General

dry rooms which are safeguarded from flooding. In addition
to the septic system, provision must be made for a suitable
wastewater discharge line in keeping with ATVDVWK A138.
Furthermore, the council, country district or district water
authority is responsible for installation and operation appro-
val.
Control unit (control and compressor)
Inlet
Preliminary sedimentation chamber
Aeration chamber
Aerator spark plug
Seepage pit (optional)
Valve block
Purification tower with integrated sampling
vessel and drain
Cable conduit
Ventilation line
96