Sitting And Reclining Positions Of The Child; Rotation; Removing The Child Car Seat; Care And Cleaning - Heyner MultiFix TWIST Instruction Manual

English
Avoid thick clothing under the belt especially in the winter.
WARNING: Make sure that the belt buckle is free from any dirt. Only clean
belt locks engage audibly and safely.
IMPORTANT:
Pull
Make sure that the straps are neither twisted nor jammed. Also check the
lap belts. These must not be twisted and should be as low as possible
above the child's hip.
WARNING: There should be no more than a finger's width between the
body and straps.

4.5. Sitting and reclining positions of the child

This children ´ s car seat is equipped with a reclining position. The operation
is quick and easy with just one hand. By pressing the positioning handle
(PG), you are able to bring the seat in the desired position for your child.
The seat engages with a clear >> click << sound.
WARNING: Always follow the instructions for rear or forward facing use.
31

4.6. Rotation

The child car seat has a 360 ° rotation function.
Seating and taking your child out of the seat becomes
much easier. It can be changed quickly from a rear to a
forward facing car seat.
To turn the seat, you must press the rotate button and
turn the seat at the same time.
WARNING: Always ensure that the revolving part of the child car seat is
locked in the forward or rear facing position before driving off. To check,
try turning the seat without pressing the safety button.
NOTE:
Make sure no dirt is jammed between the seat and the base. This can per-
manently affect the ease of the rotation.

4.7. Removing the child car seat

Press the release buttons on the ISOFIX connectors to release the ISOFIX anchorage.
Slide the ISOFIX locking arms back into the seat shell.
Now remove the child car seat from the vehicle.
NOTE:
The child car seat must never be transported in the car unless it is properly secured.

5. Care and cleaning

5.1. Removing the cover

For the later correct installation we recommend to document the removal
of the cover with photos.
Carefully pull the protection of the buckle upwards.
Open the pushbuttons between the cover of the seat base and the head
rest.
Reach under the cover at the bottom of the seat and pull it slightly forward and upwards.
Now pull the cover over the buckle.
You can wash the cover with a mild detergent in the machine (30 ° C). Please note the
instructions on the washing label.
Please never use chemicals or bleaching agents.
The plastic parts can be cleaned with lukewarm water and a mild detergent. Do not use sharp
detergents (such as solvents).
English
32