Frame Protection Installation - Cervélo ASPERO Assembly Manual

FRAME PROTECTION INSTALLATION

Note: The frame protection parts may come already
installed on the bike. If so, please refer to this
instruction only for reapplication.
Clean the chainstay and downtube area using isopropyl
alcohol. Install the Chainstay Guard and Downtube
Protector by removing the adhesive backing, and fixing
them to the frame.
14
To position the
Downtube Protector so
that the lower bottle
boss clearance holes
align concentrically
to the corresponding
threaded inserts on the
frame.
The bottom rearward edge of the Chainstay Guard
should be located 50mm forward from the back of the
rear dropout. Ensure that it is wrapped around the
inside of the chainstay as shown in the image above.
50mm