Frame Protection Installation - Cervélo S3 2019 Assembly Manual

FRAME PROTECTION INSTALLATION

Install chain catcher when installing the front
derailleur. Complete final adjustment with the
chain in the small chainring and largest cassette
cog. Tighten the connecting bolt to 4 Nm.
NOTE: Installation of the chain
catcher is recommended as it will
prevent damage to the frame in the
case that the chain is dropped
inside the chainrings.
29
Install the front
derailleur using the
bolt provided with the
derailleur. Torque to the
derailleur specifications.
Clean the chain stay using isopropyl
alcohol. Install the Chain Stay Guard
by removing adhesive backing, and
fixing the guard to the frame. The
bottom rearward edge should be
approximately 12 mm from the
front edge of the Rear Derailleur
12 mm
Hanger.