St36 Stem; Frame & Component Preparation - Cervélo SOLOIST Assembly Manual

ST36 STEM

Cervélo ST36 Stem
(Aluminum)
80mm ST-A027-80*
90mm ST-A036-90
100mm ST-A036-100
110mm ST-A036-110
120mm ST-A036-120
130mm ST-A036-130
80mm version does
*
not include ST36
Cable Guide.
Tighten fork
steerer fixing
screws to 5Nm.
7
To mount a cycling
computer or
accessory such as a
light or camera, use
Accessory Mount Kit
(Front) MT-LM-F-004
Tighten ST35 Cable
Guide (MT-597) fixing
Tighten stem
screw finger tight
faceplate fixing
(1Nm max)
screws to 6Nm.
FRAME & COMPONENT PREPARATION
Hold the frame using a secured seatpost only.
Clamping the top tube can damage the frame
and void your warranty.
ST36 stem can not
be flipped for
additional stack.
NOTE: Non-use of the
Seatpost Clamp Cover
may result in seatpost
binding due to
accumulated debris.
1. Slide Seatpost Clamp Cover
onto seatpost.
2. Apply carbon paste to the
frame and seatpost shaft to be
inserted into the frame.
3. Insert the seatpost and the
assembled Seatpost Clamp
(SPC-STA) into the frame.
Generously grease
all internal
4. Adjust height and torque
surfaces of the
the Seatpost Clamp to 8Nm
Seatpost Clamp.
maximum.
8